Skip to the content
Clearance

Write off clearance stock

For
Staff
Access
Clearance: Edit

When stock is expired, damaged beyond sale or thrown out, write it off.

Write it off

  1. Open Clearance and select the entry. (On the list you can also select Adjust.)
  2. Select Write off.
  3. Set the Amount.
  4. Check the name beside "as" and the stock before and after (5 → 2), then select Confirm write off.

What happens next

The quantity falls and the history shows "Written off -3" with your name. The write-off also appears in the Write-offs report, for logins that can open it.

If a write-off customer is set in Admin → Clearance (Write-offs go to customer), the sheet says "This also sends a write-off to Minfos". Mortar then makes a transfer in your store's Minfos to that customer. It leaves it unsent, and changes no stock in Minfos. A toast gives its number: check it and send it in Minfos.

If no customer is set, Mortar makes no transfer. The stock still comes off here, and a toast says "The write-off isn't in Minfos: There is no Minfos write-off code set." Write the stock off in Minfos yourself.

A toast offers Undo for a few seconds.

If something goes wrong

Only 3 in stock

You can't write off more than the entry holds. Lower the Amount, or correct the quantity if the count is wrong.

N of these are reserved for a web order

Some of the batch is held for a web customer. Confirming writes them off anyway, and the web order looks for stock at another store.

No Minfos transfer: There is no Minfos write-off code set

The stock is written off in Mortar, but no transfer was made. Ask someone with Administrator access to enter the code in Admin → Clearance. Then open the entry and select Try again in its history.

Many lines to write off

Use Change many clearance lines at once.

Checked against the product on 13 November 2026.